> For the complete documentation index, see [llms.txt](https://docs.rtkdata.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rtkdata.com/integration-hub.md).

# Integration Hub

- [Integration Hub: RTK Setup Guides](https://docs.rtkdata.com/integration-hub/integration-hub.md): RTKdata setup guides for DJI, Autel and XAG drones, Emlid, Trimble, Leica and Topcon rovers, NTRIP field software, machine control and ag auto-steer.
- [NTRIP Clients & Field Software: RTK Setup Guides](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software.md): Connect any NTRIP client or field software to RTKdata. Guides for SW Maps, Lefebure, Emlid Flow, FieldGenius, Carlson SurvPC, and more. Free 30-day trial
- [NTRIP & GGA Explained: AUTO Mountpoint](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/ntrip-and-gga-essentials.md): How NTRIP and NMEA GGA work with RTKdata. The caster reads your GGA position to pick the nearest base station via the AUTO mountpoint, not a VRS. Port 2101.
- [SW Maps NTRIP Setup: Connect to RTK Corrections](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/sw-maps.md): Guide to connecting SW Maps to RTKdata via NTRIP on Android. Stream centimeter-level RTK corrections to any Bluetooth GNSS receiver. Free 30-day trial
- [Emlid Flow NTRIP Setup: Reach RTK Corrections](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/emlid-flow.md): Configure Emlid Flow NTRIP for Reach RS2+, RS3 and RX receivers with RTKdata. Add host, port 2101, AUTO mountpoint and Global CS for centimeter RTK fix.
- [DJI Pilot 2 RTK Setup: Connect NTRIP Corrections](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/dji-pilot-pilot-2.md): Set up RTKdata NTRIP on DJI Pilot 2 for M350, M300 and Mavic 3E RTK drones. Pick Custom Network RTK, port 2101, AUTO mountpoint for centimeter mapping.
- [u-center NTRIP Setup: u-blox ZED-F9P RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/u-center-u-blox-f9.md): Configure the u-center NTRIP client for u-blox ZED-F9P boards with RTKdata. Set COM port, baud rate, host, port 2101 and AUTO mountpoint to verify RTK fix.
- [Septentrio RxTools NTRIP Setup: DataLink & Web UI](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/septentrio-rxtools.md): Stream RTKdata NTRIP corrections to Septentrio mosaic and AsteRx receivers using RxTools DataLink or the web interface. Port 2101, AUTO mountpoint, GGA at 1 Hz.
- [EOS Tools Pro NTRIP Setup: Arrow GNSS RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/eos-tools-pro.md): Stream RTKdata NTRIP corrections to EOS Arrow Gold and Arrow 200 via EOS Tools Pro. Set port 2101, AUTO mountpoint and Android mock location for GIS RTK.
- [Lefebure NTRIP Client: Android RTK Setup](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/lefebure-ntrip-client.md): Connect Lefebure NTRIP Client to RTKdata on Android. Stream RTK corrections to any Bluetooth GNSS receiver with centimeter-level accuracy. Free 30-day trial
- [Carlson SurvPC / SurvCE NTRIP RTK Setup](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/carlson-survpc.md): Connect Carlson SurvPC or SurvCE to RTKdata NTRIP corrections. Configure your GPS rover, NTRIP host, port 2101 and AUTO mountpoint for centimeter RTK fix.
- [FieldGenius NTRIP Setup: Windows & Android RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/fieldgenius.md): Connect MicroSurvey FieldGenius on Windows or Android to RTKdata NTRIP. Set the instrument profile, host, port 2101 and AUTO mountpoint for centimeter RTK fix.
- [QField RTK Setup: Centimeter NTRIP Corrections](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/qfield.md): Get centimeter RTK in QField for QGIS with RTKdata. Mock location via Lefebure or a receiver NTRIP client, port 2101, mountpoint AUTO.
- [GNSS Master NTRIP Setup: Android Mock Location](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/gnss-master.md): Use GNSS Master on Android to relay RTKdata NTRIP corrections to any app via mock location. Connect a u-blox F9P receiver, port 2101, AUTO mountpoint.
- [Mapit GIS NTRIP Setup: Android & iOS RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/mapit-gis.md): Connect Mapit GIS on Android and iOS to RTKdata NTRIP for centimeter RTK. Built-in NTRIP client, receiver setup, Send GGA and geoid heights.
- [HYPACK NTRIP Setup: RTK for Hydrographic Survey](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/hypack.md): Set up the HYPACK NTRIPOUT driver to feed RTKdata RTK corrections to your vessel GNSS receiver. Port 2101, AUTO mountpoint, GGA at 1 Hz for hydro survey.
- [Mission Planner NTRIP Setup: ArduPilot RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/mission-planner.md): Send RTKdata NTRIP corrections to any ArduPilot drone in Mission Planner. RTK/GPS Inject, caster host, port 2101, AUTO mountpoint and GGA.
- [QGroundControl NTRIP Setup: PX4 Drone RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/qgroundcontrol.md): Send RTKdata NTRIP corrections to any PX4 drone in QGroundControl. NTRIP settings, host, port 2101, AUTO mount point and the RTK Fixed check.
- [MyUtiliGuard NTRIP Setup: RTK Utility Locating](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/myutiliguard.md): Connect MyUtiliGuard and the Subsite UtiliGuard 2 RTK to RTKdata NTRIP. Login fields, Station mountpoint AUTO and centimeter locating accuracy.
- [Trimble Access NTRIP Setup: Survey Style & RTCM3](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/trimble-access.md): Connect Trimble Access to RTKdata NTRIP corrections. Set Broadcast format to RTCM3 instead of CMRx, type mountpoint AUTO, port 2101, and clear base data errors.
- [Trimble Unity NTRIP Setup: Source Field & TMM](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/trimble-unity.md): Set up RTKdata NTRIP corrections in Trimble Unity. Enter host, port 2101 and type the AUTO source manually, or route corrections via Trimble Mobile Manager.
- [Auterion NTRIP App Setup: Freefly & Skynode RTK](https://docs.rtkdata.com/integration-hub/ntrip-clients-and-field-software/auterion-ntrip-app.md): Connect Auterion drones like Freefly Astro and Inspired Flight to RTKdata via Third-Party RTK. Caster details and AUTO mountpoint for centimeter RTK.
- [GNSS Rover NTRIP Setup Guides: RTK Corrections](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers.md): Device-specific NTRIP setup guides for GNSS rovers and receivers on RTKdata. Find your host, port 2101, mountpoint AUTO, and RTK corrections settings.
- [Emlid Reach RS4 / RS4 Pro RTK Setup: Emlid Flow](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/emlid-reach-rs4.md): Set up the Emlid Reach RS4 and RS4 Pro with RTKdata NTRIP in Emlid Flow. Correction input, GGA, mountpoint AUTO, tilt compensation and fix rate tips.
- [Emlid Reach RS3 RTK Setup: Emlid Flow NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/emlid-reach-rs3.md): Set up the Emlid Reach RS3 with RTKdata NTRIP in Emlid Flow for centimeter RTK. Correction input, GGA, tilt compensation calibration, and Global CS guidance.
- [Emlid Reach RS2+ RTK Setup: Emlid Flow NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/emlid-reach-rs2+.md): Connect the Emlid Reach RS2+ to RTKdata NTRIP in Emlid Flow. Correction input, GGA, the Confirm Login prompt fix and a free 30-day trial.
- [Emlid Reach RX / RX2 NTRIP Setup: RTK Corrections](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/emlid-reach-rx-rx2.md): Step-by-step guide to connecting Emlid Reach RX and RX2 to RTKdata via NTRIP in Emlid Flow. Covers iOS and Android setup including mock location configuration
- [Trimble R12i / R10 RTK Setup: Trimble Access](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/trimble-r12i.md): Connect the Trimble R12i, R10, and R750 to RTKdata NTRIP in Trimble Access. Create a Single Base RTCM v3 style (not VRS), mountpoint AUTO, for centimeter RTK.
- [Trimble Receivers & Catalyst DA2: NTRIP Setup](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/trimble-receivers.md): Set up Trimble Access, Earthworks and Catalyst DA2 with RTKdata NTRIP. Single Base RTCM v3 instead of VRS, mountpoint AUTO, and the Catalyst tier cap.
- [Leica GS18 & GS16 RTK Setup: NTRIP in Captivate](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/leica-gs18.md): Connect Leica GS18 T, GS16, and GS07 receivers to RTKdata NTRIP in Captivate. Bluetooth internet, RTK rover profile, mountpoint AUTO, GGA, and tilt setup.
- [ArduSimple simpleRTK2B NTRIP Setup: F9P RTK](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/ardusimple-simplertk2b.md): Connect the ArduSimple simpleRTK2B / simpleRTK3B (u-blox ZED-F9P) to RTKdata NTRIP for centimeter RTK. Bluetooth phone or USB u-center setup with GGA.
- [Bad Elf Flex NTRIP Setup: Bad Elf GPS App RTK](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/bad-elf-flex.md): Set up the Bad Elf Flex GNSS receiver with RTKdata NTRIP corrections for centimeter RTK. OS-level Bluetooth pairing and Bad Elf GPS app NTRIP steps.
- [Bad Elf Flex Mini RTK Setup: Bad Elf GPS App](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/bad-elf-flex-mini.md): Connect the pocket-sized Bad Elf Flex Mini to RTKdata NTRIP for centimeter RTK. Bluetooth pairing, Bad Elf GPS app NTRIP profile, and GGA setup for fieldwork.
- [SparkFun RTK Facet Setup: SW Maps or WiFi NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/sparkfun-rtk-facet.md): Connect the SparkFun RTK Facet (u-blox ZED-F9P) to RTKdata NTRIP for centimeter RTK. Two paths: Bluetooth with SW Maps or the built-in WiFi config portal.
- [Septentrio mosaic-X5 NTRIP Setup: RTK Corrections](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/septentrio-mosaic-x5.md): Configure the Septentrio mosaic-X5 for RTK corrections via NTRIP using the web interface or RxTools DataLink. Step-by-step setup for advanced GNSS users.
- [EOS Arrow Gold NTRIP Setup: EOS Tools Pro RTK](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/eos-arrow-gold.md): Connect the EOS Arrow Gold to RTKdata NTRIP via EOS Tools Pro for centimeter RTK. Bluetooth pairing, GGA, Android mock location, and geoid height setup for GIS.
- [Topcon HiPer VR / HR RTK Setup: MAGNET Field](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/topcon-hiper-vr-hr.md): Set up the Topcon HiPer VR and HiPer HR with RTKdata NTRIP in MAGNET Field. HiPer VR 4G modem or controller internet, mountpoint AUTO, GGA, and tilt setup.
- [Sokkia GCX3 / GRX3 RTK Setup: MAGNET Field](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/sokkia-gcx3-grx3.md): Set up the Sokkia GCX3 and GRX3 with RTKdata NTRIP in MAGNET Field. Receiver or controller internet, mountpoint AUTO typed manually, GGA, and tilt setup.
- [CHC i93 / i90 / X7 RTK Setup: LandStar 8 NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/chc-i93-i90.md): Set up CHC i93, i90, i76, i73, and X7 receivers with RTKdata NTRIP in LandStar 8. Choose receiver or controller internet, enable GGA, and reach RTK Fix.
- [Hi-Target V200 / vRTK RTK Setup: Hi-Survey Road](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/hi-target-v200-vrtk.md): Set up the Hi-Target V200 and vRTK with RTKdata NTRIP in Hi-Survey Road. Receiver vs Phone Network, enable GGA (often off), and reach RTK Fixed.
- [South Galaxy G7 / G6 RTK Setup: SurvX NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/south-galaxy-g7-g6.md): Connect the South Galaxy G7 and G6 to RTKdata NTRIP via SurvX. Receiver or phone internet, enable GGA (often off by default), and reach RTK Fixed.
- [SingularXYZ E1 Pro RTK Setup: SingularPad NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/singularxyz-e1-pro.md): Connect the SingularXYZ E1 Pro to RTKdata NTRIP in SingularPad. Data Link setup, mountpoint AUTO, port 2101, GGA output and the geoid model for correct heights.
- [Hemisphere S631 / S321 RTK Setup: PocketMax](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/hemisphere-s631-s321.md): Connect the Hemisphere S631 and S321 to RTKdata NTRIP via PocketMax for centimeter RTK. Modem or controller internet, GGA, plus VS330 marine setup.
- [GeoMax Zenith60 / 40 RTK Setup: X-PAD Ultimate](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/geomax-zenith60-zenith40.md): Set up the GeoMax Zenith60 and Zenith40 with RTKdata NTRIP in X-PAD Ultimate. Receiver 4G or controller internet, mountpoint AUTO, GGA, and Zenith Manager.
- [Stonex S980A/S900A NTRIP Setup: Cube-a and Web UI](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/stonex-s980a-s900a.md): Set up the Stonex S980A and S900A with RTKdata NTRIP in Cube-a or the Web UI at 192.168.10.1. Receiver or controller internet, mountpoint AUTO, GGA, and tilt.
- [Tersus Oscar / David RTK Setup: Nuwa App NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/tersus-oscar-david.md): Connect the Tersus Oscar and David to RTKdata NTRIP via the Nuwa app. PDA or receiver network, mountpoint AUTO, GGA, and Oscar tilt compensation setup.
- [ComNav T300 / K8 RTK Setup: Survey Master NTRIP](https://docs.rtkdata.com/integration-hub/gnss-rovers-and-receivers/comnav-t300-k8.md): Connect the ComNav T300 and K8 to RTKdata NTRIP via Survey Master. Internal modem or PDA CORS, mountpoint AUTO, port 2101, and RTK Quality tips for Fixed.
- [Drone RTK Setup: DJI, Autel & Skydio NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs.md): Connect DJI, Autel, Skydio and XAG drones to RTKdata NTRIP corrections for centimeter RTK. Setup guides plus universal credentials, port 2101, AUTO.
- [DJI Mavic 3 Enterprise RTK Setup: DJI Pilot 2](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-mavic-3-enterprise-rtk.md): Set up the DJI Mavic 3 Enterprise (3E, 3T, 3M) with RTKdata Custom Network RTK in DJI Pilot 2 for centimeter NTRIP corrections. Port 2101, mountpoint AUTO.
- [DJI Matrice 4 Enterprise RTK: NTRIP Setup](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-matrice-4-enterprise-rtk.md): Guide to connecting DJI Matrice 4E RTK to RTKdata via Custom Network RTK in DJI Pilot 2. Covers 4T RTK and DJI Dock 2 configuration for autonomous operations.
- [DJI Dock 2 RTK Setup: FlightHub 2 NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-dock-2.md): Connect the DJI Dock 2 with Matrice 3D to RTKdata NTRIP via FlightHub 2 for centimeter RTK on unattended missions. Ethernet or 4G, port 2101, AUTO.
- [DJI Dock 3 / Matrice 4D RTK Setup: FlightHub 2](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-dock-3-matrice-4d.md): Connect DJI Dock 3 and the Matrice 4D to RTKdata via Custom Network RTK in FlightHub 2. Host, port 2101 and the ALL CAPS AUTO mountpoint.
- [DJI Matrice 300 / 350 RTK & M30T: Pilot 2 NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-matrice-300-350-m30t.md): Connect DJI Matrice 300 RTK, Matrice 350 RTK and M30T to RTKdata NTRIP in DJI Pilot 2: Custom Network RTK, port 2101, AUTO mountpoint, fix troubleshooting.
- [DJI D-RTK 3 / D-RTK 2 with Network RTK Corrections](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-d-rtk-3.md): Run the DJI D-RTK 3 or D-RTK 2 alongside RTKdata NTRIP corrections. Custom Network RTK in DJI Pilot 2, port 2101, mountpoint AUTO, one source at a time.
- [DJI Phantom 4 RTK Setup: GS RTK App NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-phantom-4-rtk.md): Connect the DJI Phantom 4 RTK (P4R) to RTKdata NTRIP in the GS RTK app for centimeter survey accuracy. Custom Network RTK, port 2101, mountpoint AUTO.
- [DJI Agras T50/T40/T25 RTK Setup: Network NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-agras-t50-t40-t25.md): Configure the DJI Agras T50, T40 and T25 spray drones with RTKdata NTRIP for centimeter RTK. Disable D-RTK 2 Search, pick Custom Network RTK, port 2101.
- [DJI Agras T70P / T100 RTK Setup: Network NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/dji-agras-t70p-t100.md): Connect the DJI Agras T70P and T100 to RTKdata via Custom Network RTK and the D-RTK 3 AG module. Host, port 2101 and the AUTO mountpoint.
- [Autel EVO II RTK Setup: Custom Network NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/autel-evo-ii-rtk.md): Set up the Autel EVO II Pro RTK V3 and Enterprise 640T with RTKdata Custom NTRIP for centimeter accuracy. Region hosts, port 2101, mountpoint AUTO.
- [Autel EVO Max 4T / 4N RTK Setup: Custom NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/autel-evo-max-4t-4n.md): Connect the Autel EVO Max 4T, 4N and Alpha to RTKdata NTRIP. Enable RTK, choose Custom Network RTK, then enter host, port and AUTO mountpoint.
- [Skydio X10 / X10D NTRIP Setup: Centimeter RTK](https://docs.rtkdata.com/integration-hub/drones-and-uavs/skydio-x10.md): Set up the Skydio X10 and X10D with RTKdata NTRIP for centimeter RTK. RTK/PPK attachment, host, port 2101, AUTO mountpoint and the Fix check.
- [XAG P100 / P150 RTK Setup: XAG One App NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/xag-p100-p150.md): Connect XAG P100 and P150 ag drones to RTKdata via CORS in the XAG One app. Own data SIM, RTCM 3.2 MSM4 and the AUTO mountpoint.
- [eBee X / Geo / TAC RTK Setup: eMotion NTRIP](https://docs.rtkdata.com/integration-hub/drones-and-uavs/ebee-x-ebee-geo.md): Connect the senseFly and AgEagle eBee X, Geo and TAC to RTKdata NTRIP in eMotion. Host, port 2101 and AUTO mountpoint for centimeter mapping.
- [ABZ C10 Cleaning Drone: RTK NTRIP Setup](https://docs.rtkdata.com/integration-hub/drones-and-uavs/abz-innovation-c10.md): Connect the ABZ Innovation C10 cleaning drone to RTKdata using Network RTK in ABZ Control. NTRIP host, port 2101, mountpoint AUTO, plus facade multipath tips.
- [Agriculture RTK Setup: NTRIP Auto-Steer Guides](https://docs.rtkdata.com/integration-hub/agriculture.md): RTKdata NTRIP corrections for precision agriculture auto-steer. Compatibility for FieldBee, FJD, Raven, Trimble, Topcon and more, plus field setup tips.
- [AgOpenGPS NTRIP Setup: AgIO RTK Auto-Steer](https://docs.rtkdata.com/integration-hub/agriculture/agopengps.md): Connect open-source AgOpenGPS and a u-blox ZED-F9P to RTKdata NTRIP via AgIO for 2.5 cm RTK auto-steer. Port 2101, mountpoint AUTO, GGA interval 5.
- [John Deere StarFire RTK Setup: NTRIP via Modem](https://docs.rtkdata.com/integration-hub/agriculture/john-deere-starfire.md): Use a John Deere StarFire SF6000/SF7000 with an external NTRIP modem to reach RTKdata for centimeter RTK. Needs mRTK license, port 2101, mountpoint AUTO.
- [CLAAS GPS Pilot RTK Setup: RTK NET Auto-Steer](https://docs.rtkdata.com/integration-hub/agriculture/claas-gps-pilot.md): Connect CLAAS GPS Pilot with the SAT 900 receiver to RTKdata via RTK NET NTRIP for centimeter auto-steer. Not locked to CLAAS EASY, port 2101, AUTO.
- [Trimble GFX / CFX RTK Setup: Internet NTRIP](https://docs.rtkdata.com/integration-hub/agriculture/trimble-gfx-agriculture.md): Configure Trimble GFX-750, GFX-1260 or CFX-750 ag displays with RTKdata NTRIP for centimeter RTK. Pick Internet RTK, never VRS. Port 2101, mountpoint AUTO.
- [Machine Control RTK Setup: Dozers & Graders](https://docs.rtkdata.com/integration-hub/machine-control.md): RTKdata NTRIP corrections for Topcon, Leica and Trimble machine control on excavators, dozers and graders. 10-20 mm accuracy, port 2101, mountpoint AUTO.
- [Topcon 3D-MC / MC-X1 NTRIP Setup: Machine RTK](https://docs.rtkdata.com/integration-hub/machine-control/topcon-3d-mc.md): Set up Topcon 3D-MC and MC-X1 machine control with RTKdata NTRIP for centimeter RTK. Not locked to TopNET Live. Port 2101, mountpoint AUTO.
- [Leica iCON iGD4 RTK Setup: Machine Control](https://docs.rtkdata.com/integration-hub/machine-control/leica-icon-igd4.md): Connect Leica iCON iGD4 machine control to RTKdata NTRIP for centimeter RTK on excavators, dozers and graders. Configure on the receiver, port 2101, AUTO.
- [Trimble Earthworks NTRIP Setup: Machine RTK](https://docs.rtkdata.com/integration-hub/machine-control/trimble-earthworks.md): Connect Trimble Earthworks on a TD520 to RTKdata NTRIP for centimeter RTK on dozers, excavators and graders. Simple Use NTRIP toggle, port 2101, AUTO.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://docs.rtkdata.com/integration-hub.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.