EOS Tools Pro

EOS Tools Pro - How to Connect with RTKdata.com (NTRIP RTK Setup)

Stream RTKdata.com corrections to your EOS Arrow receiver via EOS Tools Pro on iOS/Android.

Requirements

  • EOS Arrow rover + antenna (open sky)

  • EOS Tools Pro app with internet access

  • RTKdata.com credentials (username/password).

Don’t have an RTKdata.com account yet? 👉 Start 30-day Free Trial or View Pricing

Step‑by‑step

1

1) Power & connect

Power on the Arrow, then open EOS Tools Pro and connect over Bluetooth. Confirm a live approximate position.

2

2) Open NTRIP/Differential

Go to Differential / NTRIP and create a new profile.

3

Enter RTKdata.com connection settings (Regional hostnames + IP fallback)

Use the regional RTKdata.com hostname where possible. If your device only accepts numbers or your network DNS blocks hostnames, use the numeric IP fallback. Keep ALL CAPS where noted.

  • Host (domain): rtk.rtkdata.com

  • Host (IP fallback): 13.56.117.10

  • Port: 2101

  • Username / Password: your RTKdata.com credentials

  • Mountpoint (ALL CAPS): AUTO (recommended) — or AUTO_WGS84, AUTO_ITRF2020, AUTO_ITRF2014

Only these four mountpoints are valid. Typing local CRS names as mountpoints will result in no corrections. Always use ALL CAPS.

4

4) Start & verify FIX

Tap Start/Connect to begin streaming. Watch for Receiving corrections and solution RTK FIX.

Tips & vertical reference

  • Keep open sky for faster FIX. If stuck on FLOAT, re‑check regional IP, credentials, and mountpoint = AUTO.

  • Heights are ellipsoidal; apply a geoid for orthometric elevations if required.

Need help? → Network parameters · Troubleshooting

PreviousSW MapsNextDJI Pilot / Pilot 2

Last updated